Restore Default Settings; Program Box - Team Orion Vortex R10.1 Pro Mode D'emploi

ESC overheating: green LED flashes x-x-x (single flash).
Motor overheating: green LED flashes as xx-xx-xx (double
flash).
Please note that the motor overheating protection does
not work with all brushless motor brands.

RESTORE DEFAULT SETTINGS

With the throttle in the neutral position, press and hold the
"SET" key for 5 seconds, the red and green LED will flash
simultaneously indicating that the parameters have been
reset to the factory default values

PROGRAM BOX

The optional program box allows you to modify all of the ESC
parameters and to modify/update the ESC firmware (via the
PC software). It is the ideal way to adjust your ESC.
• The program box is required to modify the advanced ESC
settings including the timing settings.
• The program box is required to use the ESC in conjunction
with the PC software.
• The program box firmware is independent from the ESC
software. You may need to update the program box or
ESC firmware via the PC software so that they can work
together.
ww.teamorion.com 17