Start Mode "Punch; Max Brake Force; Max Reverse Force; Initial Brake Force (Minimum Brake) - Team Orion Vortex R10.1 Pro Mode D'emploi

4. Start mode "punch"

This parameter sets the initial throttle punch when the car
accelerates. Level1 gives a very soft initial acceleration and
level 9 gives a very strong initial acceleration.

5. Max Brake Force

This parameter adjusts the maximum breaking force. A
higher value provides stronger braking, but it also causes
extra stress to the ESC and motor.

6. Max Reverse Force

This parameter adjusts the maximum power when travelling
in reverse.

7. Initial Brake Force (minimum brake)

This parameter adjusts the minimum amount of braking
power when the brakes engage. The default value is equal to
the drag brake value (if drag brake is active).

8. Neutral Range

This parameter adjusts the throttle sensitivity around the
neutral point. A higher value means that the throttle will
have to be moved further for the car to move forward,
backward or brake.

9. Overheating Protection

This parameter activates or deactivates the overheating
protection. Output power will be cut-off if the temperature
of the ESC or the internal temperature of the motor goes
(sensored only) over a factory preset value for 5 seconds.
When the protection is activated, the green LED flashes.
16 Copyright Team Orion © 2014