Preparing The Equipment For Starting; Starting; Maintenance And Repairs - Solo 128L Instructions D'emploi

1.5 Preparing the equipment for starting

Check the complete machine for operational safety.
 The stop switch should function properly.

The throttle must have freedom of movement and return to the idle position on its own accord.

The cutters and contact protection must be tightly secured and in perfect condition.

Ensure the spark plug cap and the ignition cable are connected firmly. A loose connection may cause
a spark, which can ignite any existing fuel:air mixture - fire hazard!
Should the check reveal any irregularities or recognisable damage (also to the frame), incorrect
adjustments or reduced efficiency of the machine, do not commence work. Take the power tool to a
specialised workshop and have it checked.

1.6 Starting

 Start the machine no less than 3 metres from the refuelling location. Never start the machine in an
enclosed space.
 Ensure that you are standing firmly on the ground when starting. Always start on even ground, with a
firm grip on the power tool.
 Only one person at the time may operate this power tool - no other people should be within a radius of
15 m - even when starting.
 Continue with the starting procedure as described in section 7. "Starting/Stopping the engine".

1.7 Maintenance and repairs

The power tool must be serviced on a regular basis. Only perform maintenance work or repairs yourself if
the work is described in these operating instructions or in the separate operating instructions for the
engine. All other work must only be performed by an authorised workshop.

Do not maintain, repair or store the machine near an open flame.

Before cleaning, maintenance and repair work, always stop the engine first and pull the spark plug
cap. Exceptions: carburettor and idle adjustments.

For any repairs only use original parts from the manufacturer.

Do not modify, alter or change the machine as this may impact on the safe operation of the machine
and may lead to accidents and injuries!
Safety regulations
ENGLISH 5