Factory Setting; Resetting Parameters To Factory Setting (Reset); Set Menu Parameters; Operation Mode - IKA ULTRA_TURRAX Mode D'emploi

10

Factory setting

The device is supplied with following factory setting:
Menu Settings:
mode A
max rpm 6000 rpm
timer max 30 minute
language English
Working Setting:
target rpm 400 rpm
timer sec off
rev sec off
10.1
Resetting parameters to factory setting
To reset the parameters to the factory settings, proceed as following:
• Pull out main plug from the device.
• Hold the controller buttons "Menu/Back" and "Timer" simultane-
ously and re-insert main plug in power outlet.
• The unit is now reset to the factory settings.
11 Setting menu parameters
11.1

Operation mode

The device can be operated in mode A, B and P1 to P9. The mode
setting will be stored automatically when operation is over, or the
device is switched off. User may change the mode setting in the
main menu if necessary.
• Operation mode A
In this mode, when current operation is over or the device is
switched off, all working settings will not be stored.
• Operation mode B
In this mode, when current operation is over or the device is
switched off, all menu and working settings will be stored.
• Operation mode P1 - P9
In mode P1-P9, the user can set and save required parameters,
(target speed, timer value and rev value) in program. The param-
eter settings can only be changed in the menu program. These
settings can also be used directly when necessary.
• Setting operation mode between A and B
 Press the "Menu/Back" button (C) in the main menu.
 Turn the "Rotating/Pressing" knob (B) to select the "mode" item
in the main menu.
 Press the "Rotating/Pressing" knob (B).
 Turn the "Rotating/Pressing" knob (B) to select mode A or B in
submenu.
 Press the "Rotating/Pressing" knob (B) again to complete the
process.
 Press the "Menu/Back" button (C) to return to the working screen.
• Setting operation mode between P1 and P9
 Press the "Menu/Back" button (C) in the main menu.
 Turn the "Rotating/Pressing" knob (B) to select the "mode"
item in the main menu.
22