Type-Identical Markings - Dräger Panorama Nova S Mode D'emploi

Masquer les pouces Voir aussi pour Panorama Nova S:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Use
2.5
Approvals
The full face masks are approved according to:
EN 136:1998 Cl. 3+
(EU) 2016/425
Declaration of conformity: see www.draeger.com/product-certificates
In addition, the full face masks comply with the requirements for flame
engulfment in EN 137:2006.
The full face masks may only be used with approved overpressure
self-contained
breathing
apparatuses
equipment.
The mask/helmet combination complies with DIN 58610:2014.
The following mask-helmet combinations are approved:
Panorama Nova S/HPS
Only use mask/helmet combinations with a water screen when in
hazardous areas.
2.6

Type-identical markings

The full face masks are marked as follows:
Connector
P
EPDM or SI
Mask body
EN 136:1998 CL. 3+
CExxxx (notified body in Europe)
PC (uncoated)
Visor
F (fire brigade)
14
or
overpressure
airline
(approved by Dekra Exam)
3
Use
3.1
Preconditions for use
The mask/helmet combination needs to be carefully adapted to the
equipment wearer (adjustment of the adapter slot and internal
helmet components) due to the rigid structure.
3.2
Preparations for use
 Use mask spectacles, if necessary.
3.3
Donning the mask/helmet combination and
checking the functional integrity
1. Adjust the adapter slot and the internal helmet components.
WARNING
!
To ensure leak tightness of the full face mask, the adapter slot
and internal helmet components must be precisely adjusted.
Extreme head shapes can lead to incompatibilities or
leakages.
2. Stroke any hair back off of your forehead. Your forehead must be
kept clear to ensure a tight fit of the full face mask.
3. Don the protective headgear, leave the chin strap open.
4. Place the carrying strap around your neck.
5. Take hold of both mask/helmet adapters, then slide the upper edge
of the full face mask against your forehead under the protective
headgear.
6. Pull both mask/helmet adapters backwards simultaneously to
tighten and clip them into the adapter slots in the protective
headgear.
7. Adjust the full face mask and loosely close the chin strap of the
protective headgear under your chin.
Panorama Nova S - P

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Panorama nova p

Table des Matières