Dion F61 Instructions D'installation page 10

Instructions d'installation/ Installation instructions : F6113T941
Ensemble Adaptateur F61 / Adapter Kit F61 : JF K26952

Install the two braces (6 & 7) as shown using flange bolts 3/8'' x ¾'' (8) and nuts
provided (9).

Square the assembly.

Tighten all bolts, including the main module fasteners (4 and 5).

Loosen the locking nut of the chain tightener (10) to close the space between the rod
nut and the support (11).

Insert the spring (12) and tight it in place at a compressed length of 19 à 22mm (3/4 to
7/8''). Tighten well the spring locking nuts (13).

Adjust the tension on the chain until the gap between the support and the nut (11)
reaches a maximum of 1,5mm (1/16'').

Tighten the locking nut (10). See the operator's manual for the chain tension
adjustment.
18 février 2013