Symbol; Safety Information - Amprobe LT-10 Mode D'emploi

SYMBOLS

Caution! Risk of electric shock.
W
Caution! Refer to the explanation in this manual.
To avoid electric shock, do not touch ANY part of antenna dur-
ing lamp or voltage tests. Touching antenna during these tests
affects tester sensitivity.
The equipment is protected by double insulation or reinforced
T
insulation.
N
Battery.
)
Canadian Standards Association (NRTL/C)
P
Complies with European Directives.
;
Conforms to relevant Australian standards.
Do not dispose this product as unsorted municipal waste.
=
Contact aqualified recycler.

SAFETY INFORMATION

The meter complies with:
IEC/EN 61010-1 3rd Ed., UL61010-1 2nd Ed. and CAN/CSA C22.2 No. 61010-1-
04 + CSA Update No.1: 2008 to CAT II 300 V, CAT I 600 V, pollution degree 2.
EMC IEC/EN 61326-1
"This product has been tested to the requirements of CAN/CSA-C22.2
No.61010-1, second edition, including Amendment 1, or a later version of
the same standard incorporating the same level of testing requirements."
Measurement category lll (CAT III) is for equipment intended to form part of
a building wiring installation. Such equipment includes socket receptacles,
fuse panels, and some mains installation control equipment.
Measurement Category II (CAT II) is for measurements performed on
circuits directly connected to low voltage; for example, measurements on
household appliances, portable tools and similar equipment.
CENELEC Directives
The instruments conform to CENELEC low voltage directive 2006/95/EC and
electromagnetic compatibility directive 2004/108/EC
3