Einhell Royal BWP 9 Mode D'emploi page 8

Anleitung BWP 9_SPK1 28.08.2006
GB
1. Important information
Please read the directions for use carefully and
observe the information provided. It is important to
consult these instructions in order to acquaint
yourself with the machine, its proper use and safety
precautions.
Important!
For safety reasons, the petrol water pump is not to
be used by children, young people under 16 years of
age, or any other persons who are not acquainted
with these directions for use.
This pump is only intended for use with clear
water. It is not suitable for use with petrol, oil,
diesel, fuel oil, milk or other liquids.
The pressure hose should have a diameter of 1
inch. Narrower or wider hoses will lead to
differences in the flow rate.
Never operate the pump without a suction strainer.
Unauthorized modifications to the motor or
improper use of the motor can negatively affect the
functions and/or operational safety and operating
life of the motor. Therefore, only use approved
replacement parts and approved accessories on
the motor.
Petrol is extremely flammable and must therefore
be handled with particular care.
Only fill the fuel tank out in the open. Avoid
overfilling.
Avoid topping-up fuel during operation at all costs.
Do not smoke when refueling or during
maintenance works. Maintain a sufficient distance
between the appliance and open fires. There is a
risk of fire and of explosion!
Touching the mufflers or the cylinder head during
operation can result in burns.
Spilt petrol must be mopped up immediately and
before the motor is started. Never start the motor if
you notice any petrol fumes. There is a risk of fire
and of explosion!
Make sure that there are no flammable or
explosive materials located in the immediate
vicinity.
Always arrange the exhaust of the motor in such a
way that good air circulation is ensured.
When the fuel tank is filled, never store the pump
in closed buildings in which the petrol fumes can
be ignited by open fires or sparks.
Allow the motor to cool before you store the pump.
Drain out the fuel before you transport the petrol-
motor pump.
Never operate the motor above its maximum rated
speed since to do so would increase the risk of
8
12:43 Uhr Seite 8
injury. The motor speed set by the manufacturer of
the petrol-motor pump must not be changed.
Make sure the cooling fins are kept free of any
foreign bodies (foliage, grass etc.).
Never touch the spark plug connector when the
motor is running. Caution – danger of electric
shock!
Keep you hands and feet away from any rotating
parts.
Always pull out the spark plug connector and
remove the spark plug before any maintenance
work in order to avoid any undesired start-ups of
the motor.
Never hit the flywheel with a hammer or suchlike
as this could lead to the flywheel bursting during
operation.
The generation of noise from the pump may
exceed 85 dB (A). The user will require noise and
hearing protection measures if this is the case.
Check all nuts, screws and fastening elements
regularly, and tighten if necessary, in order to
ensure optimum operational safety.
Keep your work area free of any objects which can
be caught in rotating parts.
Never operate the motor in enclosed or constricted
areas. Danger of poisoning!
Only close off the pressure pipe momentarily.
Danger of overheating!
2. Layout (Fig. 1-3)
1 Tank cover
2 Carry handle
3 Pressure connection
4 Oil dip stick / oil filler opening
5 Petrol pump (primer)
6 ON/OFF switch
7 Reversing starter
8 Air filter cover
9 Choke lever
10 Throttle lever
11 Suction connection
12 Water drain plug
13 Tread for starting