I Continuity And Resistances [ ] - Chauvin Arnoux C.A 5220G Mode D'emploi

AC voltages
400 mV
V AC
(1)
Digital
0.1 mV
resolution
Bargraph
10 mV
resolution
V AC
impedance
V elec
impedance
Accuracy
±5%R
(3)
Permitted
overload
(1) Press the RANGE button.
Min measurement : 40mV
(2) 4000 count display limited to 600V
(3) Use on frequency : 40Hz to 500Hz, except the
400mV range from 40Hz to 100Hz.
CONTINUITY AND RESISTANCES
Never test a resistance on a live circuit
I Connect the leads to the multimeter and to the circuit or the component to
be tested.
I Place the selector switch on the ohmmeter function
Press the Ω/
button to change from continuity sound test to resistance
measurement and vice versa.
I Automatic range selection: read the measured value
I Memorise the value, if necessary, by pressing the HOLD button.
If necessary, press the following buttons:
I RANGE to select the range manually
I MIN.MAX to read the min or max values
I
to light the display
4 V 40 V 400 V
1 mV 10 mV 100 mV
100 mV 1 V 10 V
10 MΩ
270 kΩ
± 1.5 % reading ± 1 count
600 V rms and 900 V peak
Ω
20
600 V
(2)
1 V
100 V