Resistances; Continuity Sound Test; Diode Test - Chauvin Arnoux C.A 5011 Notice De Fonctionnement

Never test a resistance on a live circuit.
„ Connect to the terminals of the circuit or the component to test.
If the «Voltest» light comes on, presence of a voltage U > 10 V
leads immediately and cut off the voltage before making the resistance measurement.
„ Analogue reading: to get the resistance in W, multiply the reading on the 50 scale
by the reading coefficient shown in the table.
„ Digital reading: if necessary, press the following keys, HOLD to hold in memory
and for display backlighting.
Ω
Max
reading
Digital
Accuracy
Max
reading
Scale
Analogue
Reading
coefficient
Accuracy
Permitted overload
(1) As % of the reading (rdg) from 10 to 100 % of the range
(2) As % of the end of scale
(3) 5 % rdg ± 5 counts

8. CONTINUITY SOUND TEST

„ Connection and specifications: idem Resistances for 400 Ω range.
„ Place the selector switch on the
„ Continuous audible beep emitted for a resistance R ≤ 400 Ω.
„ Connection and specifications: idem Resistances.
„ Place the selector switch on the
„ Analogue reading: voltage drop up to 2000 mV for the forward direction of the component.
50 scale, reading coefficient x 100
„ Digital reading: for the forward direction of the component, voltage drop up to
2000 mV.
„ Accuracy: digital 2 % rdg ± 2 counts and analogue 2.5 % full scale.
NB : The positive polarity is on the V Ω Hz

7. RESISTANCES

400 Ω 4 kΩ
399.9 Ω 3.999 Ω
(2) (3)
500 Ω 5 kΩ
x 10 x 0.1
(2)

9. DIODE TEST

40 kΩ 400 kΩ
39.99 Ω 399.9 kΩ
1% rdg ± 2 counts
50 kΩ 500 kΩ
50
x 1 x 10
2.5 %
600 V
function.
function.
terminal.
21
. Unplug the
4 MΩ 40 MΩ
3.999 MΩ 39.99 MΩ
(3)
5 MΩ 50 MΩ
x 0.1 x 1