Continuity Sound Test; Diode Test; Frequencies (Hz) - Chauvin Arnoux C.A 5011 Notice De Fonctionnement

Ω Ω Ω Ω Ω 400 Ω Ω Ω Ω Ω
399.9 Ω
Max reading
Digital
(1) (3)
Accuracy
500 Ω
Max reading
Scale
Analogue Reading
x10
coefficient
Accuracy (2)
Permitted overload
(1) As % of the reading (rdg) from 10 to 100 % of the range (2) As % of the end of scale (3) 5%rdg ± 5 counts

8 - CONTINUITY SOUND TEST

Connection and specifications: idem Resistances for 400 Ω
range
Place the selector switch on the
Continuous audible beep emitted for a resistance R ≤ 400 Ω

9 - DIODE TEST

Connection and specifications: idem Resistances
Place the selector switch on the
Analogue reading: voltage drop up to 2000 mV for the forward
direction of the component.
50 scale, reading coefficient x 100
Digital reading: for the forward direction of the component, voltage
drop up to 2000 mV.
Accuracy: digital 2% rdg ± 2 counts and analogue 2.5% full scale.
NB: The positive polarity is on the V Ω Ω Ω Ω Ω Hz
10 - FREQUENCIES
Connect the leads to the multimeter and connect in parallel to
the circuit to be tested.
Set the switch to the Hz function
Digital reading: automatic range selection, kHz is displayed,
read the measured value.
If necessary, press the following keys,
HOLD to hold in memory
-
for display backlighting
-
No analogue reading: the needle stays on zero.
kHz
4 kHz
Maximum reading 3.999 kHz
Accuracy
Permitted overload
4 kΩ Ω Ω Ω Ω 40 kΩ Ω Ω Ω Ω 400 kΩ Ω Ω Ω Ω 4 MΩ Ω Ω Ω Ω
3.999 Ω 39.99 Ω
399.9 kΩ 3.999 MΩ 39.99 MΩ
1% rdg ± 2 counts
5 kΩ 50 kΩ 500 kΩ 5 MΩ
50
x0.1 x1 x10 x0.1
2.5%
600V
function
function
terminal
40 kHz
39.99 kHz
1% rdg ± 2 counts
1000 V
40 MΩ Ω Ω Ω Ω
(3)
50 MΩ
x1
400 kHz
399.9 kHz
21