Introduction; Proper Use; Features And Equipment; Included Items - Parkside PDS 290 A1 Traduction Du Mode D'emploi D'origine

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
V ~
Volt (AC)
W
Watts (Effective power)
Delta sander PDS 290 A1
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.

Proper use

Q
This device – when combined with the appropriate
sandpaper – is suitable for dry-sanding wood, plastic,
metal, filler and painted surfaces. The device is par-
ticularly suitable for corners, profiles or difficult to
access places. Any other use or modification to the
device shall be considered as improper use and
could give rise to considerable dangers. We will
not accept liability for loss or damage arising from
improper use. Not suitable for commercial use.
36 GB
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Dispose packaging and appliance in
an environmentally-friendly way!

Features and equipment

Q
ON / OFF switch
1
Oscillation speed setting wheel
2
Mains lead
3
Dust extraction spout
4
Ventilation openings
5
Backing plate (360° rotatable)
6
Adapter for external vacuum extraction
7
Reducer piece
8

Included items

Q
1 Delta sander PDS 290 A1
3 Sanding sheets
1 Adapter for external vacuum extraction
1 Reducer piece
1 Operating instructions

Technical information

Q
Nom. power input:
Rated voltage:
Nominal speed:
Nom. oscillation speed: n
Backing plate:
Protection class:
290 W
230 V∼ 50 Hz
n 6000–11000 min
-1
0
12000–22000 min
-1
0
360° rotatable
II /