Introduction; Proper Use; Features; Package Contents - Parkside PDSP 1000 B2 Traduction Du Mode D'emploi D'origine

AIR SANDBLASTER GUN
GB
PDSP 1000 B2
IE

Introduction

Congratulations on the purchase of your
WARNING!
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important in-
formation about safety, use and disposal. Before
using the product, familiarise yourself with all
operating and safety instructions. Use this product
only as described and only for the specified areas
of application. Please also pass these operating
instructions on to any future owner(s).

Proper use

The PDSP 1000 B2 sandblaster gun (hereinafter
appliance) is suitable for: the removal of rust and
paint from metal surfaces. Any other usage of or
modification to the appliance is deemed to be
improper usage and carries the risk of serious per-
sonal injury. The manufacturer accepts no responsi-
bility for damage(s) resulting from improper usage.
This appliance in intended only for domestic use.

Features

Air sandblaster gun
Nipple for air connection
Trigger
Collecting bag for sandblasting material
Screw clamp
Jet nozzle
Control dial (1/0)
Blasting medium container
Screw cap
Surface attachment
Point attachment
Outer edge attachment
Inner edge attachment
Blasting medium
2

Package contents

1 air sandblaster gun PDSP 1000 B2
1 surface attachment
1 point attachment
1 edge attachment
1 interior corner attachment
1 collecting bag for sandblasting material
1 screw clip
2 kg blasting medium
1 operating manual

Technical details

Working pressure:
Air consumption:
Container capacity:
Required air quality:
Setting value for working working pressure on the
Noise and vibration data:
Noise measurement determined in accordance
with EN 1265. The A-rated noise level of this
compressed-air tool is typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear ear protection!
Vibration emission value: ≤ 2,5 m/s
Values determined in accordance with
EN ISO 20643
6.3 bar
320 l/min
900 ml
cleaned and oil-free
pressure reducer or filter
pressure gauge set to
6.3 bar.
90,5 dB(A)
101,5 dB(A)
3 dB
2
PDSP 1000 B2