Remote Control Display (Fig.c) - Olimpia splendid Ci2 Instructions Pour L'emploi

3.3 - REMOTE CONTROL DISPLAY
C
P5
P1
P3
P7
P8
P14
P12
P13
P15
• D1. TEMP:
Display the set temperature. No display in this
area if the unit is on FAN mode.
• D2. TRANSMITTING DISPLAY:
The icon will flash once when the signal is sent
by remote controller.
• D3. ON/OFF:
Icon is displayed when the remote controller
is turned on, or vice versa.
• D4. RUNNING MODE:
Press MODE to display current running mode.
(HEAT function is invalid for cool only type
unit.)
• D5. TIME:
Display the current set time.
• D6. LOCK:
The icon will be lightened or off when pressing
LOCK.
In locked state, all the buttons are ineffective
except button LOCK.
(Fig.C)
P2
P4
P6
P9
P10
D4
P11
P16
• D7. TIME ON/OFF:
• D8. FAN SPEED:
• D9. ECONOMIC OPERATION:
D2 D1
D8 D9
In the state of time ON, icon ON will be lighte-
ned, which is the same to the state of time OFF.
Setting timer ON and OFF simultaneously, both
icons ON and OFF are displayed.
Press FAN SPEED to display the current wind
speed.
The default state is high fan speed for the unit
without medium fan speed.
This icon will be lightened or off when pressing
ECO button.
NOTE:
All the above icons will be displayed only when
the remote controller is electrified for the first
time or reset.
D3
D5
D6
D7
EN - 15