E - Adjusting The Direction Of The Air Flow; Resetting All Remote Control Functions (If Present); Lock Settings; Change Mode - Olimpia splendid Ci2 Instructions Pour L'emploi

3.5.e - Adjusting the direction of the air flow
The ventilation flap can be adjusted while the appliance is running in order to change the direction of air
flow and make the temperature in the room more natural and uniform; meaning it is more comfortable.
a. Adjust the horizontal flap (11) using the remote control (key P8). (Fig.7)
b. Open the horizontal flap (11), and then manually adjust the vertical flap (12). (Fig.8)
c. If desired, start the vertical swing of the flaps by pressing the key (P7). Press it again to stop the swing
in the desired position.
3.6 - RESETTING ALL REMOTE CONTROL FUNCTIONS
(IF PRESENT)
By pressing the key P12, all remote control settings are reset.
In this way, all settings are annulled and the remote control goes to the default status.
Furthermore, by pressing key P12 all indications possible appear on the display, making it possible to
verify the integrity of the display itself.

3.7 - LOCK SETTINGS

Press the LOCK key (P13) to lock and unlock the current settings.

3.8 - CHANGE MODE

Press the COOL/HEAT key (P15) to pass from the cooling only mode to heat pump mode. The back-light-
ing switches on during setting. The pre-defined mode for factory setting is heat pump.

3.9 - AUTORESTART

In case a black-out occurs, the appliance stores the former function mode and start up again when re-pow-
ered by recovering all previous settings.
EN - 19