Weller Kahnetics KDS808 Manuel D'utilisation page 39

examined to ensure they function properly and as intended. Check that the moving parts
function properly and do not become jammed and that parts are not damaged. All parts must
be mounted correctly and all conditions fulfilled in order to insure proper operation of the
device. Damaged protective devices and parts must be repaired or exchanged properly by a
recognised specialist service centre provided that no other instructions are given in the
operating instructions.
18. Attention
Only use accessories or auxiliary devices that are listed in the accessories list found in the
operating instructions. Only use WELLER accessories or auxiliary devices on original WELLER
devices. Using other tools and other accessories could pose a risk of injury.
19. Have your device repaired by an expert.
This device complies with the relevant safety requirements. Repairs must only be carried out
by an expert, and original WELLER replacement parts must be used; otherwise the operator
could be at risk to accidents.
20. Use with other WELLER devices.
If the device is used in conjunction with other WELLER devices or auxiliary devices, please
also read the safety notes for these devices found in the operating instructions.
21. Observe the safety requirements applicable to your workplace.
38
KDS 38 26.02.2002, 10:11 Uhr
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com