Operating Modes; Display And Operating Elements - Balluff BFT-003-A0C- Série Notice D'utilisation

Temperature sensor
BFT _ _ _ _-_ _003-_ _ _A0C-_ _

Operating modes

System start
– Display is fully powered for 2 seconds.
– When the temperature sensor is started in the
hysteresis area the output switch is by default set to
"non-active".
Display mode
Normal operation, temperature value displayed
Programming mode
Setting parameters

Display and operating elements

The temperature sensor has two operating modes: display
mode and programming mode. The selected operating
mode determines the respective function of the key.
Key functions
Press MENU key for
approx. 5 seconds. If the
password is not 0000, you
will be prompted for the
password. When
successfully confirmed
you have access to
programming mode,
otherwise you are taken
back to display mode.
Hold down both keys at
the same time
6 english
Display and operating elements
1
4
1.
2.
3.
4.
Changing to
programming
mode
Returns to
display mode
5.
6.
Status of switching output 1
Status of switching output 2 (optional)
4-digit LED display
– Temperature value
– Menu point
– Parameters
Display mode
► Press briefly
Units display
► Hold down
Displays set parameters (see page 7)
Programming mode
► Press briefly
Menu up
Parameter value up (in steps)
► Hold down
Menu up
Parameter value up (fast)
Display mode
► Press briefly
Units display
► Hold down
Change to programming mode
Programming mode
► Press briefly
Menu down
Parameter value down (in steps)
► Hold down
Menu down
Parameter value down (fast)
Display mode
► Press briefly
Units display Programming mode
► Press briefly
Select menu point
Confirm entry
2
3
5
6