Selecting The Temperature; Selecting The Operating Mode - Dometic WAECO CoolAir CA8505 Notice D'utilisation

Using the stationary air conditioner
6.3

Selecting the temperature

You can select temperatures between 17 °C and 30 °C.
➤ Press + or – (fig. 2 6/7, page 3) on the control panel or + or –
(fig. 3 2/3, page 4) on the remote control to set the temperature in 1 °C
increments.
✓ The digital display (fig. 2 5, page 3) shows the operating mode and the
selected temperature in °C.
Note
I
If mode I or II fails to achieve the selected temperature, switch to
the next mode up or to automatic mode.
6.4

Selecting the operating mode

You can choose between four operating modes and the timer function:
Operating Display
mode message
1
2
3
Automatic
Timer
000
function
➤ Press the mode button on the control panel (fig. 2 4, page 3) or the
mode + or – (fig. 3 4/5, page 4) on the remote control to select the
mode.
✓ The first position of the digital display (fig. 2 5, page 3) shows the
selected mode.
30
Explanation
Lowest output level – the fans run at the lowest level.
Medium output level – the fan runs at the medium level.
Highest output level – the fan runs at the highest level.
The system automatically selects the optimum fan
A
speed to reach the set temperature most efficiently.
Pre-selection of running time from 10 to 120 minutes.
Alternating display for operating mode and remaining
running time.
CoolAir