Control Panel - Dometic WAECO CoolAir CA8505 Notice D'utilisation

Operation
5.2

Control panel

The following control and display elements are available on the control panel
for operating the system:
No. in fig. 2,
page 3
1
2
3
4
5
6
7
8
9
26
Meaning
ON/OFF button
Fault LED (red):
The LED indicates system malfunctions.
Compressor LED (yellow):
The LED lights up when the compressor is operating.
Mode button:
Use the Mode button to switch between operating modes 1, 2, 3
or Automatic and the Timer function.
Digital display for:
– the selected operating mode
for operating mode 1
for operating mode 2
for operating mode 3
A
for automatic mode
000
for the timer function
– Selected temperature in °C (target)
+ button:
The + button increases the temperature by 1 °C or the timer
running time by 10 minutes.
– button:
The – button decreases the temperature by 1 °C or the timer
running time by 10 minutes.
POWER LED (green):
The LED indicates that the system is switched on.
Infrared receiver (for the remote control)
CoolAir