Operating the roof air conditioner
7.3
Hints for improved use
The following hints will optimise the performance of your roof air conditioner:
• Improve the heat insulation of your vehicle by sealing gaps and hanging reflective
blinds or curtains on your windows.
• If the vehicle has been subjected to direct sunlight for a long time: Operate the
roof air conditioner in the "Ventilation" (
while before switching on the "Cooling" (
• Avoid opening doors and windows as far as possible in the "Cooling" (
mode.
• Align the air nozzles sensibly.
• Make sure the air nozzles and intake grille are not covered by cloths, paper or
other objects.
7.4
Switching the roof air conditioner on and to stand-by
I
NOTE
• When roof air conditioner is switched on, it begins to condition the
air to the values that were set most recently.
• The roof air conditioner can be switched off only by cutting mains
power.
• You can use the remote control or the control panel to switch it on or
to stand-by
➤ Press the
button.
✓ The roof air conditioner is switched on.
➤ Press the
button again to switch to stand-by.
7.5
Selecting the air conditioning mode
➤ Select the desired air conditioning mode using the MODE button, see chapter
"Air conditioning modes" on page 13.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The roof air conditioner is switched to the selected air conditioning mode.
7.6
Selecting the fan setting manually
The fan controls the strength of the air supply.
16
) mode with the windows open for a
) air conditioning mode.
FreshJet3000
)
a
EN