Shifting The Two-Speed Gearbox; Stopping The Vehicle - Reely Raven Notice D'emploi

i) Shifting the two-speed gearbox
You can change gears of the built-in two-speed gearbox before or during the movement using the remote control.
To do this, briefly press the "CH4" button on the handle for the transmitter supplied at the time this operating manual
was compiled.
j) Stopping the vehicle
To stop the vehicle, proceed as follows:
• Release the throttle/brake lever on the transmitter so that it is in the neutral position, and then let the vehicle coast
to a standstill.
• Wait until the vehicle has stopped, and then switch off the speed controller (move the switch to the "OFF" position).
Do not reach into the wheels or drive components or move the throttle/brake lever on the transmitter. Do
not hold the vehicle by the wheels!
Warning!
The motor, speed controller and drive battery become very hot during use! Do not touch these parts im-
mediately after use – burn hazard!
• Disconnect the drive battery from the speed controller. Unscrew the plug-in connection completely.
• Then turn off the transmitter.
41