Temperature Window - Bresser National Geographic 90-66000 Mode D'emploi

4.2 TEMPERATURE WINDOW

The base station supports up to three outdoor sensors, each corre-
sponding to a separate channel of the temperature display. The tem-
perature can be displayed in Celsius (C) or Fahrenheit (F).
A temperature alert function is available for all channels. It can be pro-
grammed to sound when one of the remote sensors detects a tempera-
ture that exceeds or falls below the preset upper and lower limits.
OPERATION OF THE TEMPERATURE WINDOW
For all operations described in Chapter 4.2, press UP ▲ or DOWN
▼ until the [ ] icon, to the left of the indoor temperature value, be-
gins to fl ash.
FORCED SEARCH FOR REMOTE SENSORS
Select the TEMPERATURE window.
The base station can be manually activated to search for the signal from
the selected outdoor sensor by pressing and holding DOWN ▼ for 3
seconds.
The wave icon above the current channel icon shows the connection
status of the corresponding outdoor sensor:
Icon
Searching for the signals from the outdoor sensor
Corresponding outdoor sensor signal received
No signals received for over 1 hour
Status
successfully
EN
37