Bresser National Geographic 90-66000 Mode D'emploi page 43

ACTIVATING/DEACTIVATING THE TIME ALARMS
1. Press ALARM to rotate between:
• Weekday Alarm Time (displays OFF if weekday alarm is deactivated)
• Single Alarm Time (displays OFF if single alarm is deactivated)
• Pre-Alarm Time (displays OFF if pre-alarm is deactivated)
2. When the above alarms are displayed, pressing ▲ will activate and
pressing ▼ will deactivate the corresponding alarm.
Note:
Press MODE anytime during the above alarm setting procedure to
return to normal clock display.
SETTING THE TIME ALARMS
1. Press ALARM to select the alarm which you wish to confi gure.
2. Press and hold ALARM until hour starts fl ashing in the display.
3. Set Alarm Hour: Press ▲ or ▼ to adjust.
Press and hold either button to change the value rapidly.
4. Set Alarm Minutes:
Press ▲ or ▼ to adjust. Press and hold either button to change the
value rapidly.
Press ALARM to confi rm your selection.
5. Upon completion, the display will be returned to the alarm selection
screen.
Note:
Pre-alarm cannot be activated if weekday alarm or single alarm is not
enabled.
EN
43