Setting The Recording Level Manually - Panasonic RR-XS450 Mode D'emploi

Setting the recording level manually

The recording level can be adjusted automatically or manually on this unit. When the
recording level adjustment is AUTO, the sound distortion is reduced by adjusting the
recording level automatically. To record the original sound volume level faithfully such
as an instrument playing and nature sound, set the recording level adjustment to
MENU
F2 MANUAL. (The factory setting is "AUTO".)
REC *
Setting the recording level
adjustment to MANUAL
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU].
2
Press +, – to select "MIC REC MENU"
and press [q OK] to enter.
3
Press +, – to select "REC LEVEL
ADJ." and press [q OK] to enter.
4
Press +, – to select "MANUAL" and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
STOP g/RETURN
The recording level is
displayed.
Adjusting the recording level
manually
• Set the recording level adjustment to
MANUAL beforehand. (When the recording
level adjustment is AUTO, the unit does not
enter the recording standby.)
1
Press and hold
[REC *] for 1
second or more.
The unit enters the
recording standby.
Blinks
2
Aim the microphone at the sound
source to record.
3
Press u, i to adjust the
recording level (➜ page 28).
Adjustment range is 0 to 30.
(The factory setting is "15".)
Pressing [REC *] starts recording.
27
27