Setting The Recording Eq - Panasonic RR-XS450 Mode D'emploi

Setting the recording EQ

Using the recording EQ enables you to set bass, middle and treble range of recording level according to
your preferred settings for recording.
The recording EQ includes 7 types of fixed mode and the "USER" mode with which you can set the
recording level according to each frequency band.
• Set the recording level adjustment to MANUAL beforehand.
(➜ page 27) (When the recording level adjustment is AUTO,
the unit does not enter the recording standby.)
1
Press and hold [REC *] for 1 second or more.
The unit enters the recording standby.
2
Press [MENU].
3
Press +, – to select "REC EQ" and press
[q OK] to enter.
4
Press +, – to select the recording EQ mode.
Press [F1 (CONFIRM)] to confirm the details. Press
[F1] again to return to the previous screen.
When you select modes other than "USER", go to
5
step .
Setting when selecting "USER":
4
After step , press
1
[F1 (EDIT)].
150 Hz band is selected.
Press u, i to select the frequency band to
2
change, and press +, – to adjust the recording
level (±12 dB).
When the settings for the frequency band to
3
change are all complete, go to step
5
Press [q OK] to enter.
To exit the setting screen, press [F2 (CLOSE)].
The EQ mode name is not displayed after exiting
the setting screen.
Pressing [REC *] starts recording.
EQ mode Effect and application
This (basic) mode does not emphasise
FLAT
a specific sound range.
EXTRA BASS Emphasise the bass range strongly.
BASS Emphasise the bass range slightly.
MIDDLE Emphasise the middle range.
BASS&TREBLE Emphasise the bass and treble ranges slightly.
TREBLE Emphasise the treble range slightly.
EXTRA TREBLE Emphasise the treble range strongly.
This mode enables adjustment of
USER frequency bands of 150 Hz, 500 Hz,
1 kHz, 4 kHz and 12 kHz.
(The factory setting is "FLAT".)
*
When the recording level adjustment is AUTO, the
recording EQ does not function.
.
5
29
29