Panasonic RR-XS450 Mode D'emploi page 57

Table des Matières

Publicité

g Checking the timer condition or execution
state
Timer indication
: Timer is set. The display flashes when the timer is
executed.
: When the repeat settings are "ONCE", this is dis-
played if the timer recording fails. To clear the display,
change the settings to "OFF", or set the timer again.
: When the repeat setting is "DAILY" or "SELECT", this
is displayed if the timer recording fails. If the next timer
operates normally, the "
*
If the power is off at the specified time, the power
turns on and the timer recording starts, and then the
power turns off at the end time. When the power is off
at timer playback time, the file playback starts a little
behind the scheduled time.
*
During timer recording (playback), only stop operation
and volume adjustment can be performed. Switch the
Hold function to off before operation if it is on.
*
To stop an alarm, press one of the buttons on this unit.
You can stop an alarm even if the Hold function is on.
*
After setting the file to be played for timer playback, if
the set file is deleted, the alarm sounds at the timer
start time.
*
If a file shorter than the period from the start to end is
specified for timer playback, that file is played repeatedly.
" indication is redisplayed.
*
When the file playback is assigned as playback
source, the files are played back at the scheduled time
with the playback settings (SOUND EQ (➜ page 45)
etc.) which have already been set when the timer
playback setting was made.
*
When MIC or LINE is assigned as recording source,
the recording is made at the scheduled time with
the recording settings (microphone sensitivity
(➜ page 26), the line input setting (➜ page 35), etc.)
which have already been set when the timer recording
setting was made. (excluding the recording mode
(➜ page 25))
*
If the clock setting (DATE & TIME) is returned to the
factory setting, the timer operation setting (SETTING)
is automatically turned OFF.
*
1 minute before the timer recording start time, the
recording indicator blinks, and the mode switches to
recording standby.
57
57

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rr-xs420Rr-xs450eRr-xs420e

Table des Matières