Attaching The Covers - Stihl MH 700 Notice D'emploi

6 Assembling the Cultivator
Securing the cable
► Secure cable (12) using cable clip (13).
► Secure cable conduit (14) using cable
clip (15).
6.7 Attaching the Transport Handle
► Hold transport handle (1) against bracket (2)
so the front bores align.
► Insert bolts (3).
► Fit spring washers (4) and washers (5).
► Tighten bolts (3) to 20 Nm to 25 Nm.
Transport handle (1) is locked in place.
6.8 Attaching the Guard and Cov‐
ers
6.8.1 Attaching the Guard
0478-404-9604-B
► Position holders (1) so the bores align.
► Place washers (2) on bolts (3) and screw in.
► Position holder (4) so the bores align.
► Install washers (5) and bolts (6).
► Place washers (7) on bolts (6).
► Screw on nuts (8) and tighten firmly.
► Insert bolts (9) through guard plate (10).
► Place washers (11) on bolts (9).
► Screw on nuts (12) and tighten firmly.
6.8.2

Attaching the Covers

► Hook cover (1) onto bracket (2).
► Connect light cable connectors (3 and 4).
English
39