Toto DuoFit WT151M Manuel D'installation Et D'utilisation page 8

INSTALLING TOTO WASHLET ®
Follow the instruction to install the Washlet on the toilet per manual provided with
the product.
An installation kit (p/n: THU383) is required to install the water supply connection.
(Stop Valve, Reducer & Cap).
Follow the diagram below to install the components. Use tefl on tape (not
provided) as sealant between the joints.
Connect the Washlet connection hose (supplied with Washlet) to the junction valve
and the Washlet.
Warning: After installing the components, check all connections for any leak.
½"Nipple
½"FIT Angle
(Not Supplied)
Stop Valve
Water Supply
from System
1/2"MIP x
15/16" NPT
Reducer
Washer
Junction Valve
(supplied with
To
Washlet
Washlet
15/16"NPT
Washer
Cap
8