Setting Up The Device; Mains Connection; Connecting The Antenna; Dimmer - Medion MD 44196 Notice D'utilisation

7.

Setting up the device

• Place the device on a sturdy, level surface. Some aggres-
sive varnishes can corrode the rubber feet on the device.
If necessary, place the device on a suitable underlay.
7.1.

Mains connection

Connect the mains adapter.
 To do this, place the connection cable plug in the sock-
et DC9V/3A and the supplied mains adapter into a prop-
erly installed earthed power socket which is accessible
at all times.
7.2.

Connecting the antenna

Connect the antenna connector.
 To do so, insert the connector of the antenna into the an-
tenna connection
8.

Dimmer

The dimmer has three brightness levels and one level that
switches off the display lighting.
 When the radio is switched off, press the
or several times to run through the dimming phases.
64
button once