HumanTechnik lisa Mode D'emploi page 11

Water alarm:
Vibrating-
sequence
Fire alarm:
Vibrating-
sequence
P12
P14
P20
The indicator LEDs remain on for 40 seconds.
Touching the Light/Snooze switch cancel any vibration caused by lisa signals.
The indicator LEDs light the normal time (40 seconds).
Recalling the most recent signal
The lisa RF time flash stores each signal it receives for a period of 3 minutes.
During this time, you can call up the signal again by pressing the Light/Snooze
/lisa signal cancel switch button. The signal is then displayed on the indicator
LEDs. A vibration signal is not triggered.
Radio range
The lisa transmitters are designed to have a radio signal range of 80 meters
under optimum conditions.
The following conditions may result in a reduced range:
- Signal transmission through building structures or vegetation
- Interference from TVs, computer monitors and mobile phones.
Under certain circumstances, this may prevent the receiver from
functioning at all.
- Positioning of the transmitter at an unfavorable distance from surfaces
which reflect radio waves, for example floors and walls. This may lead to
the signal wave being weakened or even cancelled out by the reflected
wave.
Water Alarm LED lights
Fire Alarm LED lights
Pause 1,2 s
Pause 1,4 s
Pause 2 s
P30
P40
V
Pause 3 s
Pause 4 s
Vibration
English 11