Description; Operating Principle; Accessories; Standard (Std) - breviglieri MekFarmer 170 Manuel D'utilisation Et D'entretien

NOTE
KEEP THIS INSTRUCTION MANUAL FOR ANY FUTURE CONSUL-
TATION
IN CASE OF THE SALE OF THE MACHINE TO A THIRD PARTY,
THIS INSTRUCTION MANUAL MUST BE GIVEN IN INTACT AND
LEGIBLE.

2.2 DESCRIPTION

2
1
17 15
16
FIG. 2
1 PTO shaft support
2 Upper 3-point hitch
3 Hitch point for lifting the machine
4 Three point hitch frame
5 Rear PTO shield
6 Gearbox
7 Flat pan
8 Levelling bar adjusting jack
9 Roller scraper holder
10 Roller unit
11 Working depth adjustment unit
12 Side shield
13 Rotor
14 Blades
15 Power take off (PTO)
16 Tractor PTO protection
17 Lower hitch
18 Position of CE plate

2.3 OPERATING PRINCIPLE

The machine MEKFARMER170 rotary harrow consists of
a central framework (2 "Fig. 2"), with three-point coupling
that hitches to a harrow unit. The machine only operates
36
3 4 18 5
6
7
14 13
when hitched to a tractor with an adequate power rating
(see technical specifications for the specific power). The
power required to operate the machine is transmitted by
the tractor through the driveline (with CE marking) which
engages with the central transmission unit (6 "Fig. 2") and
operates the various tine rotors (13 "Fig. 2").

2.4 ACCESSORIES

2.4.1

STANDARD (STD)

• Pin roller adjustment.
• PTO shaft with slip clutch.
• 540/1000 rpm gearbox unit with rear PTO.
• Rear levelling bar adjustable with hydraulic rams.
• CAT II three-point hitch or CAT III for v.400 and/or with
seeder linkage.
• Side reinforcement bars.
• Blades 12 x 0.6in
MekFarmer 170
8 9 10
11
12