Front Panel Leds; Psu Leds - Promise Technology Vess A2600 Guide De Démarrage Rapide

PROMISE Technology
Figure 19: Vess front panel LED display on right side bracket
See "Front Panel LEDs" on Page 14 for a description of LED behavior.

Front Panel LEDs

When boot-up is finished and the Vess A2600 system is functioning normally:
LED
Power
System Status
Global RAID Status
Global HDD Activity Blinks BLUE to indicate one or more drives are being ac-cessed, remains dark when
Recording
System Heartbeat
OPAS USB

PSU LEDs

After powering on the Vess A2600, check the LEDs on each power supply on the back of the device. These
LEDs will light GREEN to indicate normal operation. A RED or ORANGE LED indicates a problem or unit
failure. See the Product Manual for a com-plete description of PSU and other LED indicators.
Figure 20: LEDs on Power Supplies for Vess A2600
Description
Lights BLUE to indicate the system is powered on. Blinks BLUE in shutdown mode.
Lights GREEN when healthy, RED if there is a critical prob-lem (LD offline, fan
malfunction, voltage out of range, system temperature alert), blinks RED for HDD high
temperature alert remains dark when not ready.
Lights GREEN when healthy or RED if any RAID volume is of-fline, ORANGE for
critical state of any logical drive.
no drives are being accessed.
RED indicates application running.
Blinks BLUE slowly at regular intervals to indicate the firm-ware and software are
operating normally.
Lights GREEN if an OPAS device (USB disk) is detected, RED if the OPAS operation
has failed, blinks GREEN when an OPAS operation is in progress.
PSU 1
LED
PSU 2 PSU 3
LED LED
14
Power
System Status
Global RAID Status
Global HDD Activity
Recording
System Heartbeat