Disk Drive Leds; Control Panel Leds; Task 6: Access Operating System Gui - Promise Technology Vess A2600 Guide De Démarrage Rapide

Disk Drive LEDs

There are two LEDs on each Drive Carrier. They report activity of the drive, and the drive's current
condition.
Figure 21: Vess drive carrier LEDs
The Activity LED flashes BLUE during drive activity.
The Disk Status LED displays GREEN when a drive is configured and working properly. When the lights are
RED the HDD requires manual replacement. When ORANGE is observed it indicates background RAID
activity on this particular HDD. It is just a status notification and no user action is required.

Control Panel LEDs

When system boot-up is finished, use the LEDs on the controller on the rear of the device to monitor various
functions (described below).
LED
System Fan
Ethernet
Link/Act and Speed
Figure 22: Vess control panel LEDs

Task 6: Access Operating System GUI

To access the installed operating system graphical user interface on the Vess A2600, insert a USB keyboard
into any USB port, and connect a monitor using either the VGA or HDMI port.
Figure 23: USB, HDMI and VGA interfaces on Vess A2600 rear panel
Description (refer to product manual for more details)
A steady GREEN LED indicates normal fan function. A RED LED indicates fan failure,
the fan must be replaced.
The LED located on below each port, on the left side, lights GREEN when connected,
flashes GREEN when there is ac-tivity on the port and remains dark no connection has
been established. The LED on the lower right of each port indicates connection speed,
GREEN is 100 Mbps, ORANGE is 1000 Mbps.
Fan Status
HDMI port
Connect to
VGA monitor
HDMI monitor
Vess A2600 Quick Installation Guide
Drive Status (OK)
Activity
Gigabit Ethernet port LEDs
VGA port
Connect to
15
USB ports
Use to connect to
USB keyboard for
text input