Important; Task 5: Connecting The Power - Promise Technology Vess A2600 Guide De Démarrage Rapide

PROMISE Technology
Figure 15: Vess A2600 video monitor connections and USB ports

Task 5: Connecting the Power

Insert one power cable into the power receptacle for each power supply and connect the each PSU to a
suitable power source. The Vess A2600s is equipped with a single power supply (see below). The Vess
A2600 is equipped with three power supplies in an N+1 arrangement. See "Figure 17: Vess A2600 rear panel
N+1 power connections" on Page 13.
Figure 16: Vess A2600s rear panel power connection
The Vess A2600 features three N+1 power supplies. In this arrangement, one PSU is redundant, so a
minimum of two PSUs are needed to power up the Vess A2600.
HDMI port VGA port
Connect to Connect to
HDMI monitor VGA monitor
Be sure to place the monitor and keyboard on a stable and secure surface before
connecting them to the Vess.
PSU cooling fan
For information about installing or hot swapping power supplies, please see the
product manual.

Important

Power switch
pictured in "ON"
position
Important
12
USB ports
Use to connect to
USB keyboard for
text input
Power cord
receptacle