Installation And Setting - Meister MFS280 Traduction Du Manuel D'utilisation Original

• Use protective gloves
• Wear ear-protectors.
• Wear safety goggles.
• Before carrying out any work on the
machine, pull the plug out of the
socket.
• Do not leave keys in the machine.
• Observe the general safety notes for
handling electrical tools.
• Switch the device off and pull the
plug out of the socket if the connec-
tion cable is damaged. A damaged
cable must be replaced by the manu-
facturer or by their customer service
or a similarly qualified person.
Type plate
Observe the technical specifications
detailed on the type plate! The specifi-
cations have the following meanings:
MFS280 Model designation
WU5456190 Article number
Bj. Year of construction
SN Series number
230-240 V~/
50 Hz Voltage and frequency
5456190-Schwingschleifer-man.indd 39 5456190-Schwingschleifer-man.indd 39
.
280 W Max. power consumption
n : 6000–
0
12000 min Revolutions in idle
-1
Voluntary seal of quality
(tested safety)
CE mark (conformity with
European safety standards)
Do not dispose of with the
household waste!
Safety marks
Pay attention to the safety marks! The
symbols have the following meanings:
When carrying out work in
which dust is generated,
wear a face mask and safety
goggles - do not smoke and avoid
naked flames.
Read the operating instruc-
tions!
Wear safety goggles!
Always work with a dust col-
lection system connected!
Double insulated!
7 – Installation and setting
Insert Abrasive Sheets
Switch off machine. Pull out the mains
plug. Release clamping fixtures (5) hold-
ing sanding sheet. Place sanding sheets
39
19.03.21 11:18 19.03.21 11:18