Safety Instructions Relat­ Ing Specifically To The Equipment - Meister MFS280 Traduction Du Manuel D'utilisation Original

• Wear suitable personal protective
gear. Touching or skin contact with
dust represents a risk to the operator
and anybody else in the vicinity.
Note: When sanding, for example, paint
containing lead, as well as certain types
of wood and metal, it is possible that
poisonous dust may be generated.
Take appropriate precautions to prevent
operators and anyone else in the area
breathing in dust/coming into contact
with dust.
• Use the additional handle supplied
with the unit. Loss of control of the
unit may lead to injuries
• Hold the tool by the insulated handle
surfaces when carrying out tasks
during which it is possible that the
tools will come across hidden power
cables or its own cable. Contact with
a power-carrying cable can also put
metal parts of the unit under power
and cause an electric shock.
6 – Safety instructions relat­
ing specifically to the
equipment
• Always switch on the device before
introducing it to the workpiece.
• Materials containing asbestos may
not be processed. When working
with any other materials containing
fibres, use dust protection masks and
extraction systems.
• If you wish to use the device out-
doors, ensure it is connected via
a residual current circuit breaker.
Extension cable and plug must be
designated for use outdoors.
38
5456190-Schwingschleifer-man.indd 38 5456190-Schwingschleifer-man.indd 38
• Only use for dry sanding work.
• Breathing in dust from sanding is a
health risk, therefore always work with
the dust extraction function activated.
If necessary, use a mask.
• Only attach accessories with hook
and eye coatings to the sanding plate.
• The dust extraction openings of the
sand paper and the sanding plate
must match, as far as possible.
• When sanding, do not put excessive
pressure on the machine in order to
prevent the machine from coming to a
standstill.
• Secure the work piece to prevent
it from slipping by using tensioning
mechanisms.
• Make sure that cables always lead
away from the work place.
• During operation, always guide the
device with both hands and ensure
that you are standing firmly.
• The device should never be allowed
to get wet and should not be operat-
ed in a damp environment.
• Prior to each use, check the device,
the cable and the plug. Any damages
should only be repaired by a special-
ist. Only plug the device into the sock-
et when the machine is switched off.
• When carrying out work in which dust
is generated, wear a face mask and
safety goggles - do not smoke and
avoid naked flames.
19.03.21 11:18 19.03.21 11:18