Connecting The Power Cord (1) - Pioneer AVIC-D1 Manuel D'installation

Connecting the System

Connecting the power cord (1)

Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Front speaker
Left
Rear speaker
9
Fuse holder
Fuse resistor
Fuse resistor
White
+
≠
White/black
Green
+
≠
Green/black
Note:
When a subwoofer is connected to this product instead
of a rear speaker, change the rear output setting in
the Initial Setting. (Refer to the Operation Manual.)
The subwoofer output of this product is monaural.
Gray
+
≠
Gray/black
Violet
+
≠
Violet/black
Front speaker
Right
Rear speaker