Connecting The Power Cord (1) - Pioneer AVIC-Z140BH Manuel D'installation

Recepteur de navigation multimedia
Masquer les pouces Voir aussi pour AVIC-Z140BH:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section
02
Connecting the system

Connecting the power cord (1)

Yellow
To terminal supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Note
When a subwoofer is connected to this navigation
system instead of a rear speaker, change the rear
output setting in the initial setting. (Refer to
Operation Manual.) The subwoofer output of this
navigation system is monaural.
Front speaker
Left
Rear speaker or
subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with violet and violet/black leads of this
navigation system. Do not connect anything with green and green/black leads.
Not used.
10
En
White
White/black
Green
Green/black
Green
Green/black
Violet/black
With a two-speaker system, do not connect anything
to the speaker leads that are not connected to
speakers.
Gray
Gray/black
Violet
Violet/black
Violet
Front speaker
Right
Rear speaker or
subwoofer (4 Ω)
Subwoofer (4 Ω)
 2

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Avic-x940bt

Table des Matières