To Guard Against Electromagnetic Interference; Before Installing - Pioneer AVIC-D1 Manuel D'installation

• Install this product between the driver's seat and front passenger seat so that
it will not be hit by the driver or passenger if the vehicle stops quickly.
• Never install this product in front of or next to the place in the dash, door, or
pillar from which one of your vehicle's airbags would deploy. Please refer to
your vehicle's Owner's Manual for reference to the deployment area of the
frontal airbags.
• Do not install this product in a place where it will impair the performance of
any of the vehicle's operating systems, including airbags and headrests.

To guard against electromagnetic interference

• In order to prevent interference, set the following items as far as possible from this prod-
uct, other cables or leads:
- TV antenna and antenna lead
- FM, AM antenna and its lead
- GPS antenna and its lead
In addition you should lay or route each antenna lead as far as possible from other antenna
leads.
Do not bind them together, lay or route them together, or cross them.
Such electromagnetic noise will increase the potential for errors in the location display.

Before installing

• Consult with your nearest dealer if installation requires the drilling of holes or other mod-
ifications of the vehicle.
• Before making a final installation of this product, temporarily connect the wiring to con-
firm that the connections are correct and the system works properly.
• Do not install this product in a position where the opening of the LCD panel is obstruct-
ed by any obstacles, such as the shift lever. Before installing this product, be sure to
leave sufficient space so that the LCD panel does not obstruct the shift lever when it is
fully opened. This may cause interference with the shift lever, or a malfunction of the
mechanism of this product.
18