Publicité
Les langues disponibles
Les langues disponibles
GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1
MRA screen
4
Oval head screws, black, M5 x 30
mm
4
Spacers, 15 mm
4
O-rings, 4.5 x 1.5 mm
4
Plastic washers, 12 x 5 mm
1
Edge protection strip with end
sleeves
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen.
3. Place the M5 x 30 mm Allen screws with the plastic washers through the four
holes in the MRA screen, then place the 15 mm spacers with the O-rings against
them from behind (P1).
4. Position the MRA screen and tighten the Allen screws.
Mount the edge protector strip onto the screen as shown in P2. Place the end
sleeves over the end of the edge protector strip and gently squeeze the sleeves
with a pair of pliers to secure the edge protector strip.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Honda CB500X 16-
Article No..
---
Allen keys, 3 and 5 mm
10566
10636
10992
10635
---
3
Required tools
Publicité
