Pairing; Turning Off - Marmitek BoomBoom 75 Guide Utilisateur

3.7

Pairing

1. Locate your Bluetooth music source in the vicinity of the
BoomBoom 75. The best distance is around 1 metre.
2. Ensure that the BoomBoom 75 is off.
3. Switch on the BoomBoom 75.
4. Short press the button on the BoomBoom 75. The LED starts
to blink red and blue. (It will enter pairing mode automatically
when used for the first time)
5. Switch your device's Bluetooth function on according to the
instructions of your device and go to Bluetooth settings.
6. Scan for new devices and select the name "BoomBoom 75".
7. If the Bluetooth connection process requires a password,
enter "0000". The BoomBoom 75 then connects with your
device. The blue LED will flash every 5 seconds. You will
also hear a signal via the connected sound system. The
connection has now been made and your device is linked to
the BoomBoom 75. You can now play and control the music
in your device on your sound system.
! You can link to up to 8 devices however only 1 device can be
connected to the BoomBoom 75 at one time.
! The BoomBoom 75 will exit pairing mode when no connection is
made after 10 minutes. Short press the button to enter pairing
mode again.
! The BoomBoom 75 will power off after 20 minutes when there is
no connection.
3.8

Turning off

Switch the BoomBoom 75' power switch down. The red LED will
light for 2 seconds and then goes out.
BoomBoom 75 7