List Of Spare Parts; Accessories - Habegger HIT-TRAC 16 B Mode D'emploi

Furthermore, an expert should also carry out inspections between the annual inspections,
depending on the operating and application conditions.
After your HIT-TRAC machine has come in contact with water, you should bring it to us,
HABEGGER, for servicing, so that the brake can be dried and lubricated. Loads can not be
lowered at all or only very jerkily with a wet brake. As a matter of fact, it is highly probable
that the cams of the driver plate will break off (predetermined breaking point)
8

List of spare parts

The spare parts list can be found on pages 72 - 75
9.

Accessories

9.1 Reel drive
9.1.1 Rope coiler
The rope coiler is used to wind and unwind the rope on
and off the reel easily.
1. Remove crank handle
2. Push reel onto the hub and clamp tightly into
place with the star grip.
3. Place rope below the rope guide.
4. Unwind the rope.
5. To wind up the rope, clamp the crank handle onto the reel.
9.1.2 Reel drive for longer ropes
Reel drives for long ropes are available.
68