Use According To The Intended Purpose; Safety Instructions In This Operating Manual; General Safety Instructions; Location - Habegger HIT-TRAC 16 B Mode D'emploi

3.1

Use according to the intended purpose

The motor-driven rope-pulling machine HIT-TRAC 16 is intended to pull, lift and lower
loads. The permissible pulling force is:
HIT-TRAC 16:
▲
The HIT-TRAC must not be used, under any
circumstances, to lift persons. No person should ever
take position on a structure suspended by a HIT-TRAC.
In the interest of your health, please observe the safety instructions on the machine and in
this operating manual!
3.2

Safety instructions in this operating manual

The following symbols and descriptions are used to indicate dangers, instructions and
important information:
І
This points out particularly important information which you
have to observe to use the described technology acc. to its
intended purpose
∆
Attention! This indicates that the machine, parts of the machine
and the environment could be endangered
▲
Danger! This means that there is a danger to the health
and life of the operator and other persons within the
working range of the motor-driven rope-pulling
machine.
3.3

General safety instructions

3.3.1

Location

Make sure that the machine is always operated on a firm and safe location.
Always stand outside the danger zone of the load being moved; never stand in the "tangle"
of the rope escaping from the machine.
Use the reel drive when you work with ropes longer than 50m. (see chapter 9.1)
54
16 kN (1600 kg).