Metz Mecablitz 52 AF-1 Mode D'emploi page 168

The aperture setting on the flash unit is not
automatically adjusted to that of the lens.
• The camera does not transfer data to the
• There is no exchange of data between the
• The camera is equipped with a lens without
The indicator for the zoom position of the
reflector is blinking on display panel
• Warning of shadowing on the edge of the
k
168
flash unit
flash unit and the camera.
Tap the camera's shutter release.
CPU.
image: the focal length set on the camera
lens (converted to the 35 mm format,
24x36) is shorter than theadjusted zoom
position of the reflector.
The setting for manual TTL flash exposure
correction has no effect.
• The camera does not support manual TTL
flash exposure correction on the flash unit.
Automatic switching to the flash sync speed
fails to occur.
• The camera has a between-the-lens shutter
(as do most compact cameras), Switching
to sync speed is therefore unnecessary.
• The camera operates with high-speed
synchronisation FP (camera settings).
Switching to sync speed does not occur in
the process.
• The camera operates with shutter speeds
that are slower than the flash sync speed.
Depending on the camera mode, there is
no switch to flash sync speed (see the
camera's operating instructions).