Britax B-SAFE GEN2 FLEXFIT Guide D'utilisation page 27

B-SAFE GEN2 FLEXFIT & FLEXFIT PLUS User Guide
5. Push the infant car seat
firmly into the vehicle
seat while removing
all slack from the lap
portion and then the
shoulder portion of the
vehicle belt.
Carrier Only Installation with Lap-Shoulder Belt
ü The vehicle belt is tight, not twisted, and that the infant
car seat is secure.
ü The infant car seat is secure when it moves less than
1 inch (2.5 cm) front-to-back or side-to-side at the
vehicle belt path.
ü Recline angle is correct. The proper recline angle is
achieved when the level line on the shell is level to the
ground.
ü The infant car seat handle is rotated and locked into
position 1. See page 35.
CHECKLIST
25