B-SAFE GEN2 FLEXFIT & FLEXFIT PLUS User Guide
2. Move the base up or
down until the entire red
marker is completely
visible between the two
lines on the recline angle
indicators while on the
vehicle seat.
If there is a problem achieving the proper recline angle after
installing, try another approved seating position in your
vehicle or:
a. Uninstall the base and
lower the recline angle
adjustment foot to the
lowest position.
b� Remove the base
from the vehicle
and place a rolled
towel or pool
noodle in the
vehicle seat bight�
c� Place the base against the towel or pool noodle to
level the shell and install.
NOTE: If a towel or pool noodle is needed for the
recline angle, the recline angle adjustment foot on the
base should remain in its lowest position.
IMPORTANT:
and the car seat is attached to the base, ensure that the
entire red marker is completely visible between the two lines
on the recline angle indicator.
After the child is secured in the infant car seat
ü
û
ü
û
11