Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
.
English
Handle
Hand-arm vibration (cutting wood)
Vibration emission level a
Uncertainty K = 1.5 m/s
Hand-arm vibration (cutting metal)
Vibration emission level a
Uncertainty K = 1.5 m/s
Hand-arm vibration (cutting ceramics)
Vibration emission level a
Uncertainty K = 1.5 m/s
Warning! Always wear ear protection
and suitable safety clothing when
working.
The declared vibration emission value has
been measured by standardised test methods
and can be used to compare one power tool
with another.
The declared vibration emission value may also
be used for a preliminary assessment of the
prerequisite.
Warning! The declared vibration
emission value may differ from the
value indication during actual use of
the power tool depending on the manner in
which the power tool is used.
There is a definite need to define safety meas-
ures to protect the operator which are based
on an estimate of exposure during actual con-
ditions when in use (in this case all of the oper-
ating cycle are taken into account, such as
times when the power tool is off, and those in
which it indeed is turned on, but is running with
no load).
Limit noise and vibration to a minimum!
•
Use only problem free electric power tools.
•
Regularly maintain and clean the electric
power tool.
•
Adapt your working methods to the elec-
tric power tool.
•
Do not overload the electric power tool.
•
Have the electric power tool inspected, if
necessary.
•
Switch the electric power tool off when it
is not in use.
26
7062244_MaxxSaw_Ma_#1503-19.indb 26
: 3.635 m/s
2
h,W
2
: 3.586 m/s
2
h,M
2
: 3.954 m/s
2
h
2
USING FOR THE FIRST TIME
Unpacking
1.
Open the packaging and carefully remove
the electric power tool.
2.
Remove the packaging material.
3.
Remove the packing and transport safety
devices (if any).
4.
Check that all the expected contents are
present.
5.
Inspect the electric power tool and acces-
sories for any damage during transport.
6.
Retain the packaging, if possible, until the
end of the warranty period. Thereafter,
please dispose of the packaging in an
environmentally friendly way, by utilising a
recycling system.
Warning! The product and packaging
are not toys. Children should not play
with plastic bags, foils and other small
parts! There is immediate danger of swallowing
and suffocation!
Delivery includes:
•
Compact Plunge Saw
•
Instruction manual
•
HSS Sawblade 80 teeth
•
TCT Sawblade 30 teeht
•
Diamond cutting disc
•
Dust extraction hose approx. 1.5mtr
•
Carbon brush set
•
Allen key
Inserting and changing tool inserts
(Figures 2, 3, 4)
In order to make the accessory change easier,
it is possible to fully open the guard. To do this
press the locking knob (18) using the supplied
Allen key.
The guard can now be opened completely, so
that the blade can easily be removed or
changed. The micro switch (19) ensures that
the machine cannot be started while the guard
is open. Only when the guard is closed again,
the machine can be started.
1.
Press the spindle lock (14).
2.
Loosen the clamping screw (3) by turning
it clockwise with the Allen key (16).
3.
If the tool insert (17) is clamped, move it
downwards.
27-08-15 09:42
Publicité
Table des Matières
