Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
9
10
11
12
16
THE WINGS
Use a hobby knife with #11 Blade to cut the
covering from the area above the aileron servo
mounting position.
Glue the balsa bracing in the opening.
Please note that the fiberline of the bracing
must be vertical to the horizontal lines in the
wing.
Cover the aileron servos with heatshrink tube
and connect the servo extension cable.
Remove the covering at the wing root for two
openings for the servocable.
Attach a string to the servoextension cable and
route it throug the wing.
Publicité
Table des Matières
