Operating Your Washer; The Control Panel - Haier HLP21N Guide De L'utilisateur

English

OPERATING YOUR WASHER

The Control Panel

4
WATER
LEVEL
HIGH
MEDIUM
LOW
Power ON/OFF: (1)
• Press the POWER button once to turn ON the power to
the washer. Press it again to turn the power OFF.
Start/Pause: (2)
• Press this button once to start the wash process. Press
this button once again to pause the activity during the
wash cycle. Push it
CYCLE Select: (3)
• Select your desired cycle program by pressing the
"CYCLE Select" button. There are 3 main washing cycles,
Normal, Heavy and Quickwash, along with a total of 7
wash operation options.
the
desired setting
Water Level : (4)
The default water level
•
Press the Water Level
level setting . You
high water
level settings
Function and Status Indicator Lights: (5)
• The function display lights indicate that a selected
feature is ON or what the cycle is about to begin.
• During the wash cycle, a flashing light indicates the
current STATUS of
Note: Rapid flashing indicates that the washer is not operating properly.
15
3
CYCLE
HEAVY
QUICK WASH
NORMAL
WASH
again to resume the wash cycle.
Press the CYCLE select button for
.
is s et at "MEDIUM" pos
button
to select the
may select from low, medium
depending on the
wash/rinse/spin cycle.
5 2 1
POWER
ON/OFF
START
PAUSE
STAT US
SPIN
RINSE
it on. i
proper water
and
wash load.
HLP21N
POWER
ON/OFF
START
PAUSE
CYCLE
NORMAL
QUICK WASH
HEAVY
WASH
WATER
LEVEL
HIGH
MEDIUM
LOW
STATUS
NORMAL