Leveling The Washer - Haier HLP21N Guide De L'utilisateur

Leveling the Washer

Your washer has 4 adjustable levelfing legs that fis located on the front rfight
corner. After properly placing your washer in its final location, you must level
the washer.
Warning! An "off-balance" washer will not function properly and can stop.
Using a level is best practice.
• Loosen the adjustable outer and larger ring of the fixed foot. The leveling leg
can be adjusted by turning the center foot counter-clockwise to raise the foot
and clockwise to lower the washer. Once the foot is at the right height, then
i
lock that pos it on us i
Note: If the washer is inclined more than 2˚, the machine will not operate.
Caster Option
(when supplied or purchased)
This washer can convert from fixed feet to casters for mobility and portability.
The best time to change from fixed feet to casters is when installing the
bottom panel.
Unscrew and remove the fixed feet.
Screw each of the 4 casters to the bottom base by hand first, then use a wrench to
secure the caster's locking bolt to the washer body.
Locking caster;
Lift tab DOWN to lock and UP to unlock
Leveling leg
ng the outer and larger r ng of the
Leveling leg
Higher Lower
i f i xed foot.
English
12